Product description

Rytons AC7HPWCWL wall vent is an 127mm diameter anti draught wall vent that has a verified equivalent area of 6,700mm² which is required with some retrofit ventilation projects. The vent has internal baffles and a unique draught reducing panel which can be manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required. The vent is further draught proofed with the vent cowl which is fitted over the external grille.

Key features

• Purchase 5 or more at €42.50 each
• Purchase 10 or more at €40.00 each
• Rytons controllable anti draught vent with an equivalent area of 6,700mm²
• Ideal for retrofit properties that require one vent in each room with a free area of 6500mm²
• Allows the introduction of fresh outside air into the room to disperse moisture, odors and other airborne pollutants
• Diameter 127mm
• The tube contains a light and draught reducing system of baffles
• Unique draught reducing panel manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required
• Paint or wallpaper the panel to match room décor for a discreet appearance
• External cowl protects against excessive weather conditions and alleviates air blasts through the cavity
• External grille U.V. stabilized to slow down the effects of sunlight
• Position at a high level (typically 1.7m above floor level) for all dwelling types and story heights
• White external grille
• Cowl: 217mm L x 210mm H x 93mm D
• External grille: 166mm L x 160mm H
• Tube: 127mm (5″) Dia. x 358mm L (if required, a maximum 63mm may be cut from each end of the tube)
• LookRyt® panel: 172mm L x 172mm H
• Free delivery

Product data sheet

Back to shop