Product description

Rytons AC7HPWH wall vent is an 127mm diameter anti draught wall vent that has a verified equivalent area of 6,500mm ² which is required with some retrofit ventilation projects. The vent has internal baffles and a unique draught reducing panel which can be manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required. The vent can be further draught proofed with the sperate purchase of the Rytons vent cowl which can be fitted over the external grille

Key features

• Purchase 4 or more at €34.90 each
• Purchase 8 or more at €31.90 each
• Purchase 12 or more at €29.90 each
• Rytons anti draught vent with an equivalent area of 6,500mm ²
• Ideal for retrofit properties that require one vent in each room with a free area of 6,500mm ²
• Allows the introduction of fresh outside air into the room to disperse moisture, odors and other airborne pollutants
• Diameter 127mm
• The tube contains a light and draught reducing system of baffles
• Unique draught reducing panel manually adjusted with an easy push/pull or tilt action allowing air to be controlled as required
• Interior panel is magnolia. Paint or wallpaper the panel to match room décor for a discreet appearance
• External cowl available which can be fitted over the existing grille to reduce draughts in exposed locations
• External grille U.V. stabilized to slow down the effects of sunlight
• Position at a high level (typically 1.7m above floor level) for all dwelling types and story heights
• White external grille
• External grille: 166mm L x 160mm H
• Tube: 127mm (5″) Dia. x 358mm L (if required, a maximum 63mm may be cut from each end of the tube). Rytons Aircore tube extension and tube connector are available for walls of a greater depth
• LookRyt® panel: 172mm L x 172mm H
• Free delivery

Product data sheet

Back to Shop